why is my vpn not connecting vpn not working why is my vpn not working anymore

Why is my VPN not connecting? 9 fixes that work

Adrian Maverick · · 8 min read

Most of the time a VPN will not connect for one of a few dull reasons: your internet is down, the server you picked is busy or unreachable, the network you are on blocks VPN traffic, or the VPN profile on your device is stuck. Work through the checklist below in order, because the first checks take seconds and rule out the most.

If your VPN connects but you are not sure it is protecting you, that is a different problem. Our guide on how to tell if your VPN is working covers the IP and DNS checks for that.

1. Check that the internet works without the VPN

Turn the VPN off and load a website you do not usually visit, so you are not looking at a cached page. If nothing loads, the problem is your Wi-Fi or mobile data, not the VPN. Restart the router, switch from Wi-Fi to mobile data (or the other way round) and try again.

If the internet works with the VPN off and stops when you turn it on, keep going. That is the classic "my VPN is disconnecting my Wi-Fi" symptom, and step 9 explains the usual cause.

2. Check your date and time

A clock that is wrong by hours or days can break secure connections. Certificates, which apps and servers use to prove who they are, are only valid between two set dates. The internet standard for certificates (RFC 5280) defines a certificate's validity as the period "from notBefore through notAfter". If your device thinks it is a different day, a valid certificate can look expired or not yet valid, and the VPN app may fail to sign in or fetch its server list.

Open your device's date and time settings and turn on the option to set the time automatically. Then restart the VPN app.

3. Switch to a different server

A single server can be down, overloaded or unreachable from your network while the rest work fine. Pick another location in the app, ideally one closer to you, and connect again. If one server fails and another connects at once, the problem was that server, and you can try it again later.

4. Switch protocol, if your app offers more than one

VPN apps send traffic using a protocol, and some networks treat protocols differently. WireGuard, for example, sends everything over UDP. Its own documentation says "All packets are sent over UDP." A network that limits or blocks UDP traffic can stop a WireGuard connection while ordinary web browsing still works.

If your VPN app lists more than one protocol in its settings, try another one. Our post on WireGuard vs OpenVPN explains how the two common ones differ.

5. Check for another VPN profile or app

Two VPNs competing for the same connection can stop either one from working. An old VPN app, a work profile or a security app with a built-in VPN can be the one holding the connection.

  • Open your device's VPN settings and look at the list of profiles.
  • Remove profiles from apps you no longer use.
  • Close or sign out of any other app that runs a VPN, then try your VPN again.

6. Check whether the network blocks VPNs

Some routers and networks, often at schools, workplaces, hotels and on some public Wi-Fi, block the ports or protocols VPNs use. A sign of this is a VPN that works fine at home and fails on one particular network, on every server you try.

What you can do:

  • At home, check your router's firewall or parental controls for a setting that blocks VPN traffic. Router menus vary by brand, so look in your router's manual.
  • On someone else's network, the network's owner sets the rules. A school, office or venue may not allow VPNs at all, and you should follow those rules.

Some VPN apps include a stealth or obfuscation mode. It makes VPN traffic look less like VPN traffic, which helps where VPN connections are blocked or throttled. If your app has one, it can help on a network that allows VPN use but handles it badly. Using any VPN must still follow local law and the rules of the network you are on. Our post on whether using a VPN is legal has more on that.

7. Sign in to the public Wi-Fi page first

Hotel, airport and cafe Wi-Fi often has a sign-in page before it lets you online. The IETF calls this a captive portal: "a network to which a device may be voluntarily attached, such that network access is limited until some requirements have been fulfilled", where you typically use a web browser to accept terms or enter a code.

Until you get through that page, the network blocks most traffic, including the VPN. And the portal often works by changing web or DNS traffic, which a VPN is built to stop. So:

  1. Turn the VPN off.
  2. Connect to the Wi-Fi and open a browser. If the sign-in page does not appear, try loading a plain website.
  3. Accept the terms or enter the code.
  4. Turn the VPN back on.

For why a VPN is worth turning back on afterwards, see does a VPN protect you on public Wi-Fi and our look at hotel Wi-Fi.

8. Update or reinstall the VPN app

If none of the above helps, update the VPN app and your device's operating system, then restart the device. If it still fails, delete the app, restart, reinstall it and sign in again. Reinstalling sets the VPN profile up again from scratch.

On iPhone, also check Settings for the VPN profile your app installed, and delete and re-add it if it looks stuck.

9. If the VPN "disconnects your Wi-Fi"

When the internet dies the moment the VPN drops, the Wi-Fi is usually fine. What you are seeing is often a kill switch. A kill switch blocks all internet traffic when the VPN connection stops, so nothing leaks out unprotected while the app reconnects. If the VPN cannot reconnect, for any of the reasons above, the block stays on and it looks like your Wi-Fi is broken.

Fix the connection problem and the internet comes back. To confirm it is the kill switch, turn the VPN off completely in the app (not just pause it) and check whether the internet returns. Leave the kill switch on once the VPN connects reliably again, since that is what it is there for.

Moving between networks, such as walking out of Wi-Fi range onto mobile data, can also drop a VPN for a moment. WireGuard is designed to handle this: its site says it is "capable of roaming between IP addresses". Older setups may need you to reconnect by hand. Our post on using a VPN on mobile data covers that switch.

Frequently asked questions

Why is my VPN not working anymore when it used to?

Something changed: the app, your operating system, the server, or the network you are on. Start with step 1 and step 3. If it fails only on one network, a new block on that network (step 6) is the likely cause. If it fails everywhere after an update, reinstall the app (step 8).

Why is my VPN not connecting on Wi-Fi but works on mobile data?

That points to the Wi-Fi network: a sign-in page you have not completed (step 7), or a router or network that blocks VPN traffic (step 6). Restarting your own router is worth a try too.

Why is my VPN turning off my Wi-Fi?

It usually is not. A kill switch blocks traffic when the VPN drops, so it looks as if Wi-Fi is off. See step 9.

Why is my VPN not connecting automatically?

Many apps have a setting to connect on launch or on untrusted networks. Check that it is on, that you have only one VPN profile installed, and that the app is allowed to run in the background on your device.

Is it safe to use the internet while the VPN will not connect?

Your connection works like it would without a VPN, so websites and the network owner see what they normally would. On public Wi-Fi, stick to sites that use HTTPS until the VPN is back.

Trying a different VPN

If you want to try a VPN without paying, Secria VPN Free works on iPhone, iPad, Mac and Android with a free Secria account, no card needed. Free servers are in Frankfurt and Dallas, one device at a time. Stealth mode is included on Free and helps you connect on networks that block VPNs, and there is a kill switch. Every connection uses WireGuard with an ML-KEM-1024 post-quantum key added to every session. No activity logs: we do not record browsing, DNS queries or traffic contents. Paid plans add every location, Multi-Hop, split tunneling and 5 devices. See Secria VPN.

Secria fact-checks every post against primary sources. Spotted something wrong or out of date? Email hq@secria.me and we will correct it.